Rigid wall hot tub Tribeca

The Tribeca Rigid Wall Hot Tub is a new model from Mspa that fills the niche between inflatable hot tubs and traditional acrylic hot tubs.
The advantage of a Tribeca hot tub with solid walls is that you can install it yourself without the need for a visit from a specialist company. The power cable is 5 m long and equipped with built-in residual current protection. You just have to plug it in and start the hot tub.

With its dimensions of 1.60 x 1.60 m, the jacuzzi is suitable for use by four adults and two children.

The external walls of the hot tub are made of a special material resembling wooden boards, which gives it an attractive appearance.

The hot tub has 120 air nozzles that provide a pleasant relaxing massage for the whole body.

The new generation heater installed on the hot tub has a power of 2200 W and can heat the water up to 40 °C. For greater efficiency, the heater works on two levels - the first level with a power of 1500W when the heater and air massage are on; the second stage with a power of 2200W with only the heater on.

The Tribeca hot tub filter pump pumps out 1,800L per hour and thanks to the Smart Filtration function it turns on for 10 minutes every hour to keep the water in good condition when you're away.

The hot tub's moisture-proof control panel mounts on its exterior and allows you to control the hot tub from your smartphone remotely via the Mspa Link App.

The Ozonator and the UV system, factory built into the hot tub, help to disinfect the water. Their action significantly reduces the use of water maintenance preparations.

The hot tub is supplied with the following equipment:

• Installation instructions
• Mspa Link App for remote control via smartphone
• Dashboard control panel
• Inflatable thermal cover
• Plain cover with belts
• Insulating pad
• 2 pcs. cartridge filter with cartridge filter holder
• Adapter for draining the water
• Wrench
• Floating detergent dispenser
• Repair set